News RWT s.r.o.

The sixth deburring machine in the Czech Republic with BSM 1100 RDA rotary brushes has found a new home in a specialized company for comprehensive sheet metal processing in Ostrava.

We would like to thank everyone who visited our stand at EUROBLECH in Hanover, Germany, and showed interest in our deburring machines. The BSM 1100 RDA and BSM 1100 RA deburring machines with the COBOT robotic workstation from Scheider Electric were presented at the exhibition. During the fair, we made many new business contacts and opened up new markets. Thank you again for your trust in the quality of our machines.

The BSM 1100 DRD deburring machine will assist in deburring and rounding edges on plasma and laser cut parts in a company near Hradec Králové.

Invitation to the International Engineering Fair EUROBLECH, which takes place in Hanover, Germany, from 22.-25.10.2024.

The fifth BSM 1100 RDA deburring machine in the Czech Republic in the configuration of the working units of abrasive belt, disc unit and rotary brush unit was installed in a modern, young, manufacturing company in metal production in the Ústí nad Labem region.

We had like to invite you to International Engineering show held from 8. to 11.10.2024 in Brno. You can find us in Hall no. B, booth no. 020.

During the month of July, before the start of the company summer holiday, the renovation of the floor of the assembly line, which currently excels in cleanliness and organization, was completed.

Summer holiday closing 29.7. - 11.8.2024

We would like to invite you to the ITM Engineering Technology Fair, which takes place in Poznan, Poland (4-7.6.2024). The BSM 1100 RA deburring machine will be presented at the fair, you will find us in Hall B, Stand No. 91A.

Presentation of our sales representative, company KARMET, at the international engineering fair in Belgrade (May 21-24, 2024). Deburring machine BSM 1100 RDR is presented at the show, you can find us in hall 1, stand no. 1122.

Successful presentation of the BSM 1100 RD deburring machine designed for laser cutted parts at the ELMIA Plat exhibition in Jonkoping, Sweden (14 - 17 May 2024).

Deburring machine BSM 1100 RDA for laser cutted parts is presented at the show, including novelties - silicone pads for grinding small parts with high surface adhesion and minimal size of the coin-shaped part, and an assistant to the machine operator for easy selection of tools and parameters of machine settings. Visit us in Hall A / 305, we look forward to seeing you.

We would like to invite you to the STOM Kielce Engineering Technology Fair, which takes place from 19 to 22 March 2024 in Kielce, Poland. The BSM 1100 RDA deburring machine will be presented at the fair, you will find us in Hall A / 59. We are looking forward to your visit.

RWT participated in the OPEN HOUSE exhibition of our representation, YES machinery in the United Arab Emirates. Here, the BSM 1100 RDR deburring machine of the Steelline 180 series was successfully presented and samples were ground with customers from the Middle East. At the end of the exhibition, the machine was sold to a customer in Abu Dhabi, so the machine will work alongside a BYSTRONIC laser cutting machine, making strenuous manual grinding easier and thus increasing the company's productivity.

At the end of last year, the production and assembly line were modernized, where a new laser cutting machine was installed for precision burnouts for our deburring machines. Investing in these devices helps us to continuously improve the quality of the machines we produce.

Thank you for your cooperation and we wish you health and much success in the new year.

We would like to thank everyone who visited our booth at the BLECHEXPO trade fair in Stuttgart, Germany, and showed interest in our deburring machines. During the fair, we established many new business contacts and opened new markets. Once again, thank you for your trust in the quality of our machines.

We would like to invite you to visit our stand at BLECHEXPO show held in Stuttgart, which takes place from 7 to 10 November 2023. We will be presenting the BSM 1100 RDA and BSM 1100 RDR deburring machines, you will find us in Hall 5 / 5420. We look forward to meeting you.

The 4th Deburring machine of the new generation BSM 1100 RDA has already left the gates of our production company. This time, he is heading to West Bohemia, where he will work alongside the TRUMPF laser.

From 11 to 14 October, an engineering fair was held in Turkey in the city of Konya, where the BSM 1300 DRDD deburring machine for processing plasma cutted parts was presented. Our machine was very popular and we would like to thank everyone who visited the stand of our representative, ERFAB Makina.

Visit us at MAKTEK Konya show held in Turkey (11-14.10.2023). The BSM 1300 DRDD deburring machine for plasma cutted parts will be presented here.

We had like to invite you to International Engineering show held from 10. to 13.10.2023 in Brno. You can find us in Hall no. B, booth no. 024.

The compact deburring machine BSM 650 RD was purchased by a company near Prostějov, where it will help with deburring parts from the TRUMPF laser.

Successful presentation of the company at FABTECH 2023, which takes place from 11.-14.9.2023 in Chicago McCormick place. BSM 1100 RDDR and BSM 1100 RA deburring machines were presented here, which enjoyed great interest from customers from the North American continent. Already on the first day of the fair, contracts for the supply of our machines were concluded, which help to ease the demanding work of manual deburring and contribute to the modernization and greater efficiency of the production process. At the same time, a training of our representation in the USA took place.

The second deburring machine from our company RWT was purchased by a customer who is switching to modern deburring using rotary brushes using unit A - BSM 1100 RDA. The older BSM 1300 RRDB worked for this customer for almost 10 years.

Installation of Deburring machine BSM 1100 RDR in Plovdiv, Bulgaria at ANDREA company. The machine will be used for processing laser cutted parts after the NUKON 4kW laser cutting machine. Then there was a training of sales representatives of KARMET.

Deburring and grinding machine BSM 1100 RDA with rotary brushes will newly work at the Bystronic fiber laser in a dynamically developing company near Prague.

We invite you to the ITM exhibition in Poznan, Poland, where the BSM 1100 RDR and BSM 1100 RDA deburring machines will be presented. You can find us in Hall 5A, stand no. 1.

Another BSM 1100 RDA deburring and grinding machine with units - 1st sanding belt R, 2nd disc unit D and 3rd unit with rotary brushes A. This will soon be with its new owner at the Bystronic laser.

Successful presentation of RWT at the INDUSTRY DAYS exhibition in Budapest, Hungary, where the BSM 1100 RDR EVO deburring machine was presented.

Another satisfied customer can look forward to the delivery of the deburring machine. We wish you a happy journey and see you in Israel.

The first deburring machine BSM 1100 DRD for plasma cutted parts has been successfully tested by a customer and is ready for shipment to Israel.

The fully equipped BSM 1300 RDDD deburring and grinding machine was purchased by a company in the South Moravian Region as the second second machine from RWT.

In Moravia in the Zlín region, the company purchased a fully equipped BSM 1100 RDDR deburring and grinding machine, which will help with the deburring of stainless steel parts.

Another company in the South Moravian Region invested in deburring technology and replaced the unpleasant manual grinding of parts burned on a laser or cut out on a punching press.

In the new year 2023, we continue by handing over the BSM 1100 RDDR deburring and grinding machine to our customer in the Olomouc region. This is the second machine, the first RWT deburring machine was purchased by the company in 2017. The machine is already ready for bursts of cut from 2 new TRUMPF lasers.

Thank you for your cooperation and we wish you health and much success in the new year.

This year, the last installation took place near Brno in a company that deals with complex engineering production. The machine was again replaced by unpleasant and manual grinding and deburring of parts after laser burning.

This year, the penultimate installation of the BSM 1100 RDA deburring and grinding machine, which will replace the manual grinding of metal sheets after laser cutting.

Another company replaced the unpleasant work of manual grinding of stainless steel parts burned by laser. They bought a compact BSM 1100 RD machine with a vacuum table.

Successful presentation of the company at the EUROBLECH trade fair in Hanover, Germany.

Company presentation at MSV 2022 in Brno.

Invitation to the International Engineering Fair EUROBLECH - 25. - 28.10.2022

Invitation for International Engineering show – MSV Brno 2022 (CZ)

We are preparing for autumn fairs. The first stop will be the MAKTEK EURASIA trade fair in Istanbul, Turkey (26.9. - 1.10.2022). Deburring machine BSM 1100 RDD will be presented at the exhibition, you will find us in Hall No. 9, Stand No. 914. We cordially invite you to a presentation of upcoming news

A major company in the Central Bohemian Region has invested in two deburring and grinding machines BSM 650 RDDR and 1300 RDDR, which will replace the unpleasant and demanding manual deburring of stainless steel parts after laser burning.

We handed over another deburring and grinding machine BSM 1100 RD in the South Bohemian Region, where it will help deburring and rounding edges on parts divided on punching machines.

Konya 11. - 14.5.2022

10. - 13.5.2022

Our grinding machine newly helps with the unpleasant work of manual grinding in a dynamically developing company in the Pardubice region, which sells its products all over the world!

Even in the new year 2022, we successfully continue to sell our deburring and grinding technology. This time, another well-known company from BRNO, which uses the machine for deburring and grinding parts divided on TRUPMF punching machines, said goodbye to manual deburring and grinding.

Installation of the Deburring machine in the Urals

The last installation in 2021 was carried out in the Moravian-Silesian Region, where we supplied the company with a Series 120 BSM 650 RDDR machine.

We are installing a new deburring machine again, this time in Valasske Mezirici to fiber laser.

Invitation for International Engineering show – Brno (CZ)

Online installation of the deburring machine BSM 1100 DRDD in Ankara, Turkey, by ASTOR A.S.

After a 2-year break, we are back at the trade fairs  We invite you to the MACH TOOL exhibition in Poznan, Poland /31.8. - 3.9.2021/ - Pavilion 5, stand 29.

Deburring machine installed in a nearby location in the South Moravian Region affected by a tornado.

Today we handed over another deburring machine BSM 1300 RDDR in the South Moravian Region. The photo shows the training of the machine operator.

Sample grinding of plasma-fired parts with German customer Medicke / Steelconcept from Chemnitz.

Shipping machines to America

Christmas holidays 23.12. - 3.1.2021

Today, the Deburring machine was handed over to a company in the Liberec Region, which will use it to deburr the parts divided on TRUMPF fiber lasers.

On September 3, 2020, Martin Medvedyk participated in the European Deadlift Championship in Trnava, Slovakia, where he finished in 3rd place in the Juniors up to 100 kg category and 4th in the absolute ranking of all juniors. Martin recorded an output of 280 kg on the first try. He lifted 300 kg in the second attempt, but did not record this attempt, as the callus on his hand fell off and the barbell fell out. This year, Martin will be preparing for the 2021 season, where he would like to participate in the Czech Championships, European Championships and World Championships in triathlon. We wish Martin good health and many sporting successes!

Our supplied machine recently completed over 2000 parts for ventilators for COVID-19 patients. In a time assessment, 1100 parts were completed in 100 minutes vs. a full shift of 10 employees manually deburring.

Deburring nad Grinding machine BSM 1100 RDT  is currently working in Šumperk.

Installation of the BSM 1100 RDD machine in Hradec Králové for working stainless steel parts.

The customer has already purchased the 2nd machine from RWT. This company will only grind stainless steel parts incl. jakls.

Christmas holidays 20.12. - 2.1.2020

Today we handed over the machine in a modern company, where they will use it for grinding and deburring of the stainless steel parts.

Period 5. - 8.11.2019 - Hall no. 1, booth no. 1012

Invitation for 61. International Engineering show - Brno (CZ)

Further installation of the RWT deburring and grinding machine. This time it is a BSM 1100 RDDB machine with vacuum fan and extraction system.

Poznan -Polsko

Company RWT was participating at the International Engineering show INDUSTRY DAYS 2019 held in Budapest (Hungary) - 14.-.17.5.2019. We displayed the Deburring and Grinding machine BSM 650 RDDR, serie STEELLINE 120. Thanks for visiting our booth there.

You can visit us at the following trade fairs in 2019 year.

From today, the small compact machine BSM 650 RD will help with the deburring of parts in west Bohemia.

Today we have put into operation another compact Deburring and Grinding machine to the NUKON laser.

Christmas holiday 22.12.2017 - 02.01.2018

Invitation for 59th International Engineering show - Brno (CZ)

Participation at the show in Poland - you can find us in hall 6A,booth no.6.

Participation at EUROBLECH show in Hannover

International engineering show MSV 2016

Succesfull participation at the exhibition in Russia

Invitation to MSV 2015

Training for our distributor from Japan

Participation at engineering fair in Moscow - Russia

Presentation at the show in Slovakia, Lithuania and Poland

Invitation for the exhibitions

Company RWT was awarded with prestige award GRAND PRIX at the exhibition FOR INDUSTRY 2014

Participation at the exhibition FOR INDUSTRY 2014 held in Prague

RWT take the participation at MSV 2013 show held in Brno.

We have launched a new website.